[UCLA-LUG] problem booting RH6.1

[Jorge Balbas]

chris wrote:
> 
> On Thu, 10 Feb 2000, Jorge Balbas wrote:
> 
> > > how many cpu's are in it?  what type of cpu's are they?
> >
> > One, Intel Pentium MMX 166.
> 
> umm.  the kernel messages below look like they're trying to activate more
> than 1 cpu.  look around and see if you can find a redhat boot disk that
> has a uni-processor only kernel on it.
> 
First, thanks for your help.  But... 

I don't quite understand what you mean by a boot disk with a
uni-processor only kernel.  What is that?  And where can i find it? 
Look around ... you mean around my linux software to create such boot
disk, or around redhat.com, or...? ?

Jorge Balbas

> > > > Calibrating APIC timer ...
> > > > ..... CPU clock speed is 165.1917 MHz
> > > > ..... system bus clock speed is 0.0000 MHZ
> > > > Booting Precessor 15 eip 2000
> > > > Not responding.
> > > > Total of 2 processors activated (330.14 BogoMIPS).
> > > > enabling symmetric IO mode... ...done.
> > > > ENABLING IO-APIC IRQs
> > > > init IO_APIC IRQs
> > > >  IO-APIC (apicid-pin) 2-0, 2-11, 2-16, 2-17, 2-18, 2-20, 2-21, 2-22,
> > > > 2-23 not connected.
> > > > ..MP_BIOS bug: 8254 timer not connected to IO-APIC
> > > > ...trying to setup timer as ExtINT... .. (found pin 0) ... failed.
> > > > ...trying to setup timer as BP IRQ... failed.
> > > > kernel panic: IO-APIC + timer doesn't work!
> > > > In swapper task - not syncing
> > > >