[UCLA-LUG] problem booting RH6.1

[Jorge Balbas]

chris wrote:
> 
> what kind of motherboard do you have?  

I don't know, the computer is a low end PC (built by PC club)

> how many cpu's are in it?  what type of cpu's are they?  

One, Intel Pentium MMX 166.

> are you overclocking?
>
I don't know what that means.
> 
> -chris
> 
> On Thu, 10 Feb 2000, Jorge Balbas wrote:
> 
> > Hi:
> >
> > I upgraded my system from RH6.0 to 6.1, and now it won't boot.  After
> > lilo starts loading linux (it says OK booting the kernel!), it stops and
> > gives me the following error:
> >
> > Calibrating APIC timer ...
> > ..... CPU clock speed is 165.1917 MHz
> > ..... system bus clock speed is 0.0000 MHZ
> > Booting Precessor 15 eip 2000
> > Not responding.
> > Total of 2 processors activated (330.14 BogoMIPS).
> > enabling symmetric IO mode... ...done.
> > ENABLING IO-APIC IRQs
> > init IO_APIC IRQs
> >  IO-APIC (apicid-pin) 2-0, 2-11, 2-16, 2-17, 2-18, 2-20, 2-21, 2-22,
> > 2-23 not connected.
> > ..MP_BIOS bug: 8254 timer not connected to IO-APIC
> > ...trying to setup timer as ExtINT... .. (found pin 0) ... failed.
> > ...trying to setup timer as BP IRQ... failed.
> > kernel panic: IO-APIC + timer doesn't work!
> > In swapper task - not syncing
> >
> > Windows partition boots just fine.  I check the system timer from
> > windows and it seems to be working.
> >
> > Thank you,
> >
> > Jorge
> >
> > _______________________________________________
> > UCLALUG Linux mailing list - Linux@linux.ucla.edu
> > http://linux.ucla.edu/mailman/listinfo/linux
> >
> 
> _______________________________________________
> UCLALUG Linux mailing list - Linux@linux.ucla.edu
> http://linux.ucla.edu/mailman/listinfo/linux