[UCLA-LUG] eth0 problems
Luis
Luis@paycom.net
Thu, 06 Apr 2000 07:54:21 -0700
Hello out there, I was wondering if anyone out there could help me out. I
installed red hat 6.0 on my machine. It works fine and it boots up fine. I
upgraded to red hat 6.1, the installation went good. Right when i booted
from the installation, i freezes up right when the interface eth0 starts.
Would some tell me what i could do to fix this problem . I set the box to
pick up a ip address. (DHCP) . most people tell me that i would have to set
my card to read 10/100 . When you have time I would really enjoy if anyone
could help me out.
by Luis
At 07:18 AM 4/6/00 -0700, you wrote:
>Send Linux mailing list submissions to
> linux@linux.ucla.edu
>
>To subscribe or unsubscribe via the web, visit
> http://linux.ucla.edu/mailman/listinfo/linux
>or, via email, send a message with subject or body 'help' to
> linux-request@linux.ucla.edu
>You can reach the person managing the list at
> linux-admin@linux.ucla.edu
>
>When replying, please edit your Subject line so it is more specific than
>"Re: Contents of Linux digest..."
>
>
>Today's Topics:
>
> 1. Re: [LUG-Announce] Spring 2000 Linux Install Fest (witten)
> 2. Re: .bash_profile and .bashrc files (pape@ph.ucla.edu)
> 3. Re: .bash_profile and .bashrc files (LEE,JAMES WOON)
> 4. Re: Getting Installed Linux to boot (tchow)
> 5. Re: Getting Installed Linux to boot (tchow)
> 6. Re: .bash_profile and .bashrc files (Todd A. Lyons)
> 7. recycle bin (LEE,JAMES WOON)
> 8. Re: recycle bin (mike chan)
> 9. Re: recycle bin (Leonard R. Wayne)
> 10. Re: Do Linux run on Athlon w/ 20 GB HD on UDMA 66? (Dan Helfman)
> 11. Re: Re: [UCLA-LUG]Adobe Acrobat (Dan Helfman)
>
>--__--__--
>
>Message: 1
>Date: Wed, 5 Apr 2000 10:24:43 -0700
>From: witten <witten>
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] [LUG-Announce] Spring 2000 Linux Install Fest
>Reply-To: linux@linux.ucla.edu
>
>On Wed, Apr 05, 2000 at 08:26:48AM -0700, Glenn Glazer wrote:
> > Hi, Dan.
> >
> > Something you don't mention in the email or on the website is what time the
> > meeting is.
>
>Good point. I've added the time info (11 am to 5 pm). Note that I *did*
>already have it on the install fest details page.. I just forgot to put it
>on the main page. :)
>
> >
> > Best,
> >
> > Glenn
> > (who has a 4-6 class on Monday)
> >
> > At 02:56 PM 4/4/00 -0700, you wrote:
> > >The Spring 2000 Linux Install Fest will be on Saturday, April 15, in
> > >Boelter Hall room 3811 at UCLA. For more information about the install
> fest,
> > >please see: http://www.linux.ucla.edu/events/installfest.php3
> > >
> > >This Monday, April 10, we'll have our regular meeting in Boelter Hall room
> > >3811. We'll offer two presentations for the price of one: Java Basics and
> > >Python Basics. This is your chance to learn about two powerful programming
> > >languages.
> > >
> > >More information on the UCLALUG is available at http://www.linux.ucla.edu
>
>--
>Dan Helfman
>UCLA Linux Users Group: http://www.linux.ucla.edu
>My GnuPG key: http://torsion.org/witten/public-key.txt
>
>--__--__--
>
>Message: 2
>Date: Wed, 5 Apr 2000 10:33:07 -0700 (PDT)
>From: <pape@ph.ucla.edu>
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] .bash_profile and .bashrc files
>Reply-To: linux@linux.ucla.edu
>
> > Yes, I do completely log out of my system and relogin but it still does
> 't work.
> > Also, I put the line alias ls="ls -a --color" in the .bash_profile
> and .bashrc
> > under my home directory and in the /etc/bashrc file. The way it works
> now is that,
> > I need to type bash -login to pretend that this terminal is a login shell.
> > Otherwise, the terminal from the toolbar icon in neither GNOME nor KDE
> won't
> > execute my .bash_profile and .bashrc files.
>
>What is the login shell for your user in /etc/passwd? gnome-terminal
>should invoke bash as an interactive shell, meaning that ~/.bashrc is
>sourced. If your login shell is set to /bin/sh for instance, bash will
>not read .bashrc on invocation as an interactive shell.
>
>The only way bash wouldn't source .bashrc is if you gave it the -norc
>option.
>
>
>
>--__--__--
>
>Message: 3
>Date: Wed, 5 Apr 2000 10:35:11 -0700 (PDT)
>From: "LEE,JAMES WOON" <jwlee@ucla.edu>
>To: MIng Yu <myu@anderson.ucla.edu>
>cc: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] .bash_profile and .bashrc files
>Reply-To: linux@linux.ucla.edu
>
>Why don't you try rebooting? I just put alias ls='ls -a --color' in
>/etc/bashrc and .bash_profile. I didn't work when I logged out and logged
>back in but it started working once I rebooted.
>
>
>On Wed, 5 Apr 2000, MIng Yu wrote:
>
> > Yes, I do completely log out of my system and relogin but it still does
> 't work.
> > Also, I put the line alias ls="ls -a --color" in the .bash_profile
> and .bashrc
> > under my home directory and in the /etc/bashrc file. The way it works
> now is that,
> > I need to type bash -login to pretend that this terminal is a login shell.
> > Otherwise, the terminal from the toolbar icon in neither GNOME nor KDE
> won't
> > execute my .bash_profile and .bashrc files.
> >
> > Thanks.
> >
> > Ming
> >
> > Mark James Fasheh wrote:
> >
> > > Just curious, have you completely logged out of your system, then logged
> > > back in? I don't think the bash init files are read everytime an
> xterm, etc
> > > is run, but they should inherit anything from your main login shell
> (which
> > > needs to be restarted to load the init files).
> > > --Mark
> > >
> > > --
> > > --------------
> > > If we were meant to get up early, God would have created us with
> alarm clocks.
> > >
> > > President, UCLA LUG
> > > Mark James Fasheh <mfasheh@linux.ucla.edu>
> > > http://www.exothermic.org
> > >
> > > _______________________________________________
> > > UCLALUG Linux mailing list - Linux@linux.ucla.edu
> > > http://linux.ucla.edu/mailman/listinfo/linux
> >
> >
> > _______________________________________________
> > UCLALUG Linux mailing list - Linux@linux.ucla.edu
> > http://linux.ucla.edu/mailman/listinfo/linux
> >
>
>
>--__--__--
>
>Message: 4
>Date: Wed, 5 Apr 2000 19:30:19 -0700
>From: tchow <kodiak>
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] Getting Installed Linux to boot
>Reply-To: linux@linux.ucla.edu
>
>On Wed, Apr 05, 2000 at 08:36:10AM -0700, Michael Daines wrote:
> > Hello.
> >
> > I have linux installed on one of my hard disks, and it was set up as
> > the only OS. Now, however, I have two hard disks (the second a much
> > larger one which had to be sent out for repair). On this new hard
> > disk, which is hda, I have WinNT4.0 and Win98Japanese. It uses the
> > NT Loader to decide which operating system to start. My main problem
> > is that I installed linux (RH6.1) on the smaller drive when it was
> > hda, but now it is hdc. What do I need to do to boot up linux? I
> > have a HOW-TO on putting the right files in the NT loader (boot.ini),
> > but that doesn't help much. I know that the linux still works,
>
>why doesn't it help too much? the nt boot loader should be able to boot all
>of your OSes.
>
> > because if I disconnect the bigger drive, I can start up just fine.
>
>i'm fairly sure the nt boot loader can solve your problems. however, i
>would tackle this problem by installing LILO on the first drive (hda).
>there's a multiboot howto that may help. make sure you make some rescue
>disks before doing anything serious. if you don't want to install LILO on
>/dev/hda, you could also make a bootdisk for linux with all your
>requirements. i.e. root partition /dev/hdc etc
>
>tchow
>
>--__--__--
>
>Message: 5
>Date: Wed, 5 Apr 2000 19:34:22 -0700
>From: tchow <kodiak>
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] Getting Installed Linux to boot
>Reply-To: linux@linux.ucla.edu
>
>On Wed, Apr 05, 2000 at 10:17:24AM -0700, elliot jordan wrote:
> > Would it be possible to bring in my hard drive only and windows/linux cd's
> > to the fest to get it installed together? thanks
>
>sure it may be possible. i would not recommend it. you're gonna have to
>find somebody generous enough to lend his computer temporarily to you so we
>can install it.
>
>and elliot...could you not reply to this email list when your message has
>nothing to do with the thread? your last couple emails have either borrowed
>the thread title from somewhere else or you have included messages that bear
>no relevance to your message.
>
>tchow
>
>--__--__--
>
>Message: 6
>Date: Wed, 05 Apr 2000 22:21:55 -0700
>From: "Todd A. Lyons" <cannonball@usinter.net>
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] .bash_profile and .bashrc files
>Reply-To: cannonball@usinter.net
>Reply-To: linux@linux.ucla.edu
>
>"LEE,JAMES WOON" wrote:
> >
> > Why don't you try rebooting? I just put alias ls='ls -a --color' in
> > /etc/bashrc and .bash_profile. I didn't work when I logged out and logged
> > back in but it started working once I rebooted.
>
>Standard answer: because rebooting is for adding new hardware.
> (adder: and starting new kernels)
>--
>Blue skies... Cannonball http://www.mrball.net
>* One ring to rule them all, One ring to find them *
>* One ring to bring them all, and in the darkness bind them *
> Sauron
>
>
>--__--__--
>
>Message: 7
>Date: Wed, 5 Apr 2000 22:53:12 -0700 (PDT)
>From: "LEE,JAMES WOON" <jwlee@ucla.edu>
>To: linux@linux.ucla.edu
>Subject: [UCLA-LUG] recycle bin
>Reply-To: linux@linux.ucla.edu
>
>Hi,
>
>How do I make it so that whenever I rm files they automatically be stored
>in temp directory. I guess I am asking for a recycle bin... Thanks.
>
>-James
>
>
>
>--__--__--
>
>Message: 8
>Date: Wed, 05 Apr 2000 23:03:32 -0700
>To: linux@linux.ucla.edu
>From: mike chan <snotty@linux.com>
>Subject: Re: [UCLA-LUG] recycle bin
>du>
>Reply-To: linux@linux.ucla.edu
>
>linux actually doesn't have a recycle bin... what you can do.. is use mv
>(move) instead of delete if you so wish... delete is really delete... =)
>
>also, it should be noted that when you "move" the file, it usually doesn't
>move at all.. just the information regarding the file (the directory it
>resides in) is changed... that's why when you move a 600 meg file on the
>same partition, it executes VERY quickly, whereas a copy takes a long time..
>
>so, insted of deleting, you can make an alias to move your files...
>
>or something like that... =) assuming /recycle is created, and world
>writeable, etc.etc.etc.
>
>mike
>
>At 10.53 PM 4.5.2000 -0700, you wrote:
> >Hi,
> >
> >How do I make it so that whenever I rm files they automatically be stored
> >in temp directory. I guess I am asking for a recycle bin... Thanks.
> >
> >-James
> >
> >
> >
> >_______________________________________________
> >UCLALUG Linux mailing list - Linux@linux.ucla.edu
> >http://linux.ucla.edu/mailman/listinfo/linux
> >
>snotty e/c
>PGP Key http://www.linuxvalue.com/pgp.html
>
>--__--__--
>
>Message: 9
>Date: Tue, 04 Apr 2000 14:07:01 -0700
>From: "Leonard R. Wayne" <lrwayne@earthlink.net>
>Reply-To: lwayne@alumni.ucsd.edu
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] recycle bin
>Reply-To: linux@linux.ucla.edu
>
> > How do I make it so that whenever I rm files they automatically be stored
> > in temp directory. I guess I am asking for a recycle bin... Thanks.
>
>If you are using t-shell, you could add this line to your .tcshrc file:
>
>alias rm "mv \!* /recycle_bin"
>
>(after you 'mkdir recycle_bin', of course). Also remember to
>'source .tcshrc' after modifying .tcshrc.
>
>- Len
>
>--__--__--
>
>Message: 10
>Date: Thu, 6 Apr 2000 02:29:26 -0700
>From: Dan Helfman <witten@linux.ucla.edu>
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] Do Linux run on Athlon w/ 20 GB HD on UDMA 66?
>Reply-To: linux@linux.ucla.edu
>
>On Wed, Apr 05, 2000 at 09:34:02AM -0700, Yu Ching Tong wrote:
> > Hi:
> > I post this because I experience numerous failure when installing
> > Linux (Distribution: Red Hat 6.1 from Cheap byte) It crash when the
> > actual transfer of the package from CD to HD. The only work around I
> > got right now is reduce the partition of Linux to use less than the
> > 1024 cylinder.
> >
> > Is there a patch or something that allow UDMA 66 and larger partition?
> > ( I can only use the fdisk program back in RedHat 5.1 to partition my
> > HD, than go back to install 6.1)
>
>What kind of error messages, if any, are you seeing? Red Hat 6.1 does not
>support UDMA 66 by default. You can either 1) download drivers from your
>motherboard/controller manufacturer and use those during installation, or 2)
>temporarily set your drive into DMA 33 mode for the installation and then
>patch the kernel afterwards for UDMA 66 support. Then you can switch back to
>UDMA 66.
>
> >
> > Also, is there are know problem w/ Athlon CPU?
>
>Not as far as I know.
>
> >
> > Thanks
> > Yu-Ching Tong
> > Apr. 5, 2000
>
>--
>Dan Helfman
>UCLA Linux Users Group: http://www.linux.ucla.edu
>My GnuPG key: http://torsion.org/witten/public-key.txt
>
>--__--__--
>
>Message: 11
>Date: Thu, 6 Apr 2000 02:32:02 -0700
>From: Dan Helfman <witten@linux.ucla.edu>
>To: linux@linux.ucla.edu
>Subject: Re: [UCLA-LUG] Re: [UCLA-LUG]Adobe Acrobat
>Reply-To: linux@linux.ucla.edu
>
>On Tue, Apr 04, 2000 at 05:35:38PM -0700, elliot jordan wrote:
> > Hi guys- I loaded Acroread from the source cd and also downloaded Adobe
> > Acrobat4 (into /opt) from their website. Can't get it going. Any
> suggestions
> > would be much appreciated. Must be some easy step I'm overlooking. I use
> > Caldera Openlinux 2.3 (2.2.10). Is there a special untar/unzip command or
> > install command? Thanks
>
>What format is the file you downloaded in? .tar.gz? RPM? DEB?
>
>--
>Dan Helfman
>UCLA Linux Users Group: http://www.linux.ucla.edu
>My GnuPG key: http://torsion.org/witten/public-key.txt
>
>
>
>--__--__--
>
>_______________________________________________
>UCLALUG Linux mailing list - Linux@linux.ucla.edu
>http://linux.ucla.edu/mailman/listinfo/linux
>
>
>End of Linux Digest